Cleaning up a Warman Pump
Vince is cleaning up this Warman pump so it can be painted and reassembled.
Falk Ultramax Gearbox & Tuthill Positive Displacement Blower
Tearing down a Falk Ultramax Gearbox. The input seal was leaking and pouring oil out. We are also tearing down this this Tuthill Positive Displacement Blower as it was chewing up the gears.
Dodge Master XL Gearbox
Disassembling a small Dodge Master XL Gearbox. Performing preventative maintenance as it may need new bearings and seals.
Kaeser Blower & Ampco ZP3
Tearing down a Kaeser blower as it had input bearing failure. It locked up from lack of lubrication. This Ampco ZP3 is being torn down and evaluated. It will be restored to new.
Rotex and SEW-EURODRIVE
We are doing a teardown of a Rotex. There was a failure with the crank pin. This SEW-Eurodrive motor is getting torn down to see where the failure is. Another SEW-Eurodrive is being disassembled to see the cause of failure. From what we've seen it appears to be a bad pinion [...]
Hot Oil Pump
We are repairing this hot oil pump. It is getting new bearings and new mechanical seals.
Cleated Belt
This cleated belt is for one of our wonderful customers. On this project, we are upgrading the conveyor system. Several new pulleys are on order and coming in shortly along with a new motor (increased the horsepower for the cleated belt). We are replacing the bearings with Moline-mounted units that will last the customer a [...]
Chemineer, motors and more!
Removing bad u-joints out of this drive shaft. Motor/Air Compressor - disassembling for evaluation. This Chemineer is used as a mixer; runs a mixing blade. This unit was full of epson salt and it was eating the bearings out. We reran the gears, replaced the bearings, [...]
Dodge TA7 Gearbox and Berkley Pump
This week we are working on rebuilding a Dodge TA7 Gearbox. The seals were starting to leak. So it is getting disassembled and freshened up with new bearings & seals. We are also disassembling a Berkley pump. It was no longer pumping and upon disassembly, we found it had a broken shaft. [...]
Foote-Jones & Wilfley @ FCI
This Foote-Jones reducer is getting a complete rebuild with all new bearings and seals. This Wilfley pump is getting disassembled and cleaned up.
